4" TFT LCD Touch Screen ILI9488, Arduino MEGA-2560 Shield Compatible

  • RM130.00

  • Product Code: TFT 4 ILI9488
  • Availability: In Stock

‚Äč

Resolution: 480 x 320 pixel

Controller: ili9488

 

Package Includes

  • 1 x Touch Screen Module
  • 1 x Stylus Pen

 

From: osoyoo

Before running the program, make sure there is no pre-installed Arduino software on your computer, otherwise it might conflict with our LCD driver.

Step 1: Download 4988.rar driver and unzip it into any folder with free space. You will see a new folder called 9488

Step 2: Open 9488 folder, move UTFT and URTouch folder to your Arduino library folder as following picture:

Step 3: insert the ili9488 LCD into Mega2560 board and then connect Mega2560 to your PC USB port.

Step 4: Make sure your windows can detect and install the Mega2560 board properly. If your Mega2560 cannot be installed automatically, you should install it manually as per following steps:

A: Right click My Computer->Property ->Device Manager

B:Find the unknown device and update the driver ->locally install manually.

C: select the driver location as "C:\arduino-9481\drivers" then click Next and finish installation.

Step 5: In Arduino IDE, click File->Example->URTouch->Arduino->URTouch Calibration as following
9488adj
You will see LCD touch screen shows some points, please use touch pen to touch these points one by one and calibrate the screen.

Step 6: In Arduino IDE, click File->Example->URTouch->Arduino->URTouch Button Test

You will see LCD shows some buttons, use pen to touch these buttons and you will see some straight forward result.

 

Write a review

Note: HTML is not translated!
    Bad           Good

 

Tags: Screen