WeMos D1 Mini Pro ESP8266EX (4MB) WiFi Development Board w/ CH340

Wemos D1 mini Pro - more powerful version of D1 mini

ESP8266 is a very popular WiFi enabled microcontroller. Thanks to very attractive price and huge possibilities quickly became a very popular choice - especially in domain of home automation. However bare ESP8266 is a bit tricky for beginners. It requires stable power supply, and sophisticated programming method. Wemos D1 mini solves all those inconveniences. Basically it's very similar to NodeMCU module. The main difference is size.

Wemos D1 module it's a small board with ESP8266EX chip. On board there is also USB-UART converter (popular CP2104). Because of that, all you need to start programming is simple USB cable.

Wemos D1 provides 9 GPIO ports with PWM, I2C, SPI and 1-Wire support. Thanks to 3.3V LDO module can be powered directly from USB port via microUSB power supply.

They are 3 basic methods to use Wemos. AT commands, LUA programming language with NodeMCU firmware and simplest and our favorite Arduino IDE.

Features

• Ceramic 3dB antenna
• U.FL (IPX) antenna socket

Specifications 

• ESP8266EX chip
• Flash: 4MB | 16MB
• Wi-Fi in standard 802.11 b/g/n
• WiFi modes: AP (Access Point), STA (Standalone), AP+STA
• Supports TKIP, WEP, CRC, CCMP, WPA/WPA2, WPS
• Supply voltage: 3.3V (or 5V via USB)
• CPU: RISC 80MHz (supports up to 160MHz)
• 9 GPIO - PWM / I2C / SPI / 1-Wire
• Max current on I/O pins: 12mA
• Recommended current on I/O pins: 6mA
• USB-UART converter - CP2104
• ADC - 10-bit
• 16 pins in 2,54mm - breadboard compatible
• micro USB B
• Size: 34 x 25mm

Package included

• 1 x WeMos D1 mini
• 2 x Pin headers
• 4 x Female pin headers

How to

https://www.teachmemicro.com/getting-started-wemos-d1-mini/