RFID Mifare RC522 Card Reader Module (13.56MHz) w/ Mifare Card & Keychain Tag

  • RM15.90

  • Ex Tax: RM15.00
  • Product Code: RFIC-RC522-MODULE
  • Availability: In Stock

The MF522-AN module is the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader.

 

RC522 chip:
MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products. MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.



Features

  • RFID module based on MFRC522 chip
  • Support Mifare family card and ISO14443 Type A card
  • Power LED indicator
  • Support: Mifare1 S50, Mifare1 S70, Mifare UltraLight, Mifare Pro, Mifare Desfire

 

Specifications

  • Operating Voltage: 3.3V DC
  • Operating Frequency: 13.56MHz
  • Current (Working): 13 - 26mA
  • Current (Idle): 10 - 13mA
  • Current (Sleep): <80uA
  • Current (Peak): <30mA
  • Operating Distance: 4cm (card) , 2cm (tag)
  • Communication Interface: SPI
  • Module Size: 39 x 60mm
  • Weight: 22g

 

Package Included

  • 1 x RC522 RFID Mifare module
  • 1 x Mifare Card
  • 1 x Mifare Token

 

Pinouts

SDA = NSS = Chip select
SCK = Clock input
MOSI = Master out slave in
MISO = Master in slave out
IRQ = Interrupt request
GND = Ground
RST = Reset
3.3V = Supply input

 

RC522 connection with Arduino Uno

 

Download

RFID RC522 Library & Sketch Code (1.02MB)

Write a review

Note: HTML is not translated!
    Bad           Good

Similar Products

Tags: RFIC