Current Sensor Module GY-471 (max 3Amp)

  • RM14.00

  • Product Code: GY-471
  • Availability: In Stock

 

The MAX471 module (HCSENS0041) is a complete, bidirectional, highside current-sense amplifier for portable PCs, telephones, and other systems where battery/DC power-line monitoring is critical. High-side power-line monitoring is especially useful in battery-powered systems, since it does not interfere with the ground paths of the battery chargers or monitors often found in “smart” batteries. The MAX471 has an internal 35mΩ current-sense resistor and measures battery currents up to ±3A. The module has a built-in 2K Ohm sens resitor giving the module a full sensor range of +/- 3A. An open-collector SIGN output indicates current-flow direction, so the user can monitor whether a battery is being charged or discharged. Operation is from 3V to 36V, and draws less than 100µA over temperature

 

Descriptions

  • Test Voltage range: DC3 – 25V (Arduino work on 5V) or DC3 16.5V (work on 3.3V);
  • Test Current range: DC 0 – 3A
  • Current sens max: +/- 3A
  • Current sens voltage: 3 to 36V
  • Sensor output: 1V / Amp
  • Dimensions: 20mm x 19.5mm

 

Pinout 

Sensor
RS+ ......… Load positive supply (3 to 36V)
RS- .......… Connect to load or charger

Interface
RS+ ......… Alternative load positive supply (3 to 36V)
GND ......… Connect to loads 0V/GND supply
OUT .......… Current sensor output (1V / Amp, 3V max)
SIGN .....… Current flow direction. An open-collector logic output (low = current flow from RS+ to RS-).
GND ......… Alternative GND (Connect to loads 0V/GND supply)
RS- ........… Alternative load/charger connection.

 

 

Write a review

Note: HTML is not translated!
    Bad           Good

 

Related Products