Infrared Thermometer Non-contact Module GY-906-DCI (Detect-Range 60CM) - MLX90614

  • RM330.00

  • Product Code: GY-906-DCI
  • Availability: In Stock

 

This is a MLX90614ESF-DCI non-contact infrared thermometer for use with Arduino, or any microcontroller that can communicate with it through it's I2C interface.

D ---- 3V medical application accuracy

C --- Temperature gradient compensation*

I –---- 3° FOV (angle)

Applications

  • High precision non-contact temperature measurements
  • Thermal comfort sensor for mobile air conditioning control system
  • Temperature sensing element for residential,
  • Commercial and industrial building air conditioning
  • Windshield defogging
  • Automotive blind angle detection
  • Industrial temperature control of moving parts
  • Temperature control in printers and copiers
  • Home appliances with temperature control
  • Healthcare
  • Livestock monitoring
  • Movement detection
  • Thermal alert

 

Features

  • Small size, low cost
  • Mounted on a breakout board with two types of pins
  • 10k Pull up resistors for the I2C interface with optional solder jumpers
  • Easy to integrate
  • Detect Range: 60CM
  • Field of view: 3 degrees
  • Power supply: 3 – 5V DC
  • Communication: standard IIC communication protocol, 0x5A is the fixed 7-bit address
  • Factory calibrated in wide temperature range:
    • -40°C to +125°C for sensor temperature
    • -70°C to +380°C for object temperature
  • High accuracy of 0.5°C over wide temperature range (0°C to +50°C for both Ta and To)
  • Measurement resolution of 0.02°C

 

Package Included

1 x  MLX90614ESF-BAA-000-TU-ND Infrared Thermometer Module IR Sensor for Arduino

 

 


#include <Wire.h>
#include <Adafruit_MLX90614.h>

Adafruit_MLX90614 mlx = Adafruit_MLX90614();

void setup() {
  Serial.begin(9600);
  Serial.println("Adafruit MLX90614 test");  
  mlx.begin();  
}

void loop() {
  Serial.print("Ambient = "); Serial.print(mlx.readAmbientTempC()); 
  Serial.print("*C\tObject = "); Serial.print(mlx.readObjectTempC()); Serial.println("*C");
  Serial.print("Ambient = "); Serial.print(mlx.readAmbientTempF()); 
  Serial.print("*F\tObject = "); Serial.print(mlx.readObjectTempF()); Serial.println("*F");

  Serial.println();
  delay(500);
}

 

The result will display in serial monitor.

Write a review

Note: HTML is not translated!
    Bad           Good

 

Related Products