Raspberry Pi 3 Model B+ w/ Onboard WiFi & Bluetooth v4.1

  • RM265.00

  • Product Code: PI 3 Model B+
  • Availability: In Stock

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT

The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.

The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.

 

So what's new?

  • Processor speed has increased from 1.2Ghz on Pi 3 to 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
    • Alongside a 200MHz increase in peak CPU clock frequency, we have roughly three times the wired and wireless network throughput, and the ability to sustain high performance for much longer periods.
  • New Dual-band 802.11ac wireless LAN, 2.4Ghz and 5Ghz with embedded antenna
  • Bluetooth 4.2 Low Energy
  • Faster Ethernet (Gigabit Ethernet over USB 2.0)
  • New support for Power-over-Ethernet support (with separate PoE HAT)
  • Improved compatibility for network booting
  • Improved PXE network and USB mass-storage booting
  • Improved thermal management

What's the same?

  • Same form factor as the Raspberry Pi 2 Model B (your enclosures and daughter boards should still fit, however some of the LEDs have changed position).
  • Same full-size HDMI port
  • Same 10/100 Ethernet port
  • Same CSI camera port and DSI display ports
  • Same micro USB power supply connection

 

Raspberry Pi 3 Model B+ Features

  • Broadcom BCM2837B0, 64-bit ARM Cortex-A53 Quad Core Processor SoC running @ 1.4GHz, with metal body for better heat dissipation.
  • 1GB LPDDR2 SDRAM
  • 4 x USB2.0 Ports with up to 1.2A output
  • Expanded 40-pin GPIO Header
  • Video/Audio Out via 4-pole 3.5mm connector, HDMI, CSI camera, or Raw LCD (DSI)
  • Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
  • Power-over-Ethernet (PoE) support (requires separate PoE HAT)
  • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
  • Low-Level Peripherals:
    • 27 x GPIO
    • UART
    • I2C bus
    • SPI bus with two chip selects
    • +3.3V
    • +5V
    • Ground
  • Power Requirement, 5V/2.5A via microB USB connector.
  • Supports Raspbian, Windows 10 IoT Core, OpenELEC, OSMC, Pidora, Arch Linux, RISC OS and More!

 

Specifications

  • SOC: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC
  • CPU: 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
  • RAM: 1GB LPDDR2 SDRAM
  • WIFI: Dual-band 802.11ac wireless LAN (2.4GHz and 5GHz ) and Bluetooth 4.2
  • Ethernet: Gigabit Ethernet over USB 2.0 (max 300 Mbps). Power-over-Ethernet support (with separate PoE HAT). Improved PXE network and USB mass-storage booting.
  • Thermal management: Yes
  • Video: Yes – VideoCore IV 3D. Full-size HDMI
  • Audio: Yes
  • USB 2.0: 4 ports
  • GPIO: 40-pin
  • Dimensions: 85mm x 56mm x 17mm

 

 

Software installation

Beginners should start with the NOOBS (New Out Of Box Software) operating system installation manager, which gives the user a choice of operating system from the standard distributions.

SD cards with NOOBS pre-installed should be available from any of our global distributors and resellers.

Alternatively, you can download NOOBS.

Raspbian is the recommended operating system for normal use on a Raspberry Pi.

You can browse basic examples to help you get started with some of the software available in Raspbian, find more detail about the Raspbian operating system, or read information on fundamental Linux usage and commands for navigating the Raspberry Pi and managing its file system and users.

 

Write a review

Note: HTML is not translated!
    Bad           Good

 

Tags: Raspberry