4-Channel Optocoupler Isolation Module - PC817

  • RM14.00

  • Product Code: 4-CH PC817
  • Availability: In Stock


This is a PC817 4 Channel Optocoupler Isolation Board. Onboard with 4-Channel 817 are independent, so can achieve different voltage control at the same time. Using 4-way 817 optocoupler, to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface.

This is a board designed for opto-isolation, helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.


  • I/O isolation for MCUs (Micro Controller Units)
  • Noise suppression in switching circuits
  • Signal transmission between circuits of different potentials and impedances



  • Driving Port Signal Voltage: 3.6 – 24V
  • Output Port Voltage Port: 3.6 – 30V
  • Output Port Current: 10mA max
  • Jumper Cap Can Achieve Output Port Is Pull Up Or Pull Down Output



  • Driving Port Signal Voltage: 3.6 – 24V
  • Output Port Voltage Port: 3.6 – 30V


Package List

  • 1 x PC817 4 Channel Optocoupler Isolation Board



  • The input port is shared with GND;
  • The output ports are independent of each other;
  • It  is optocoupler output.V and G will be connected after input valid signa in input port


Write a review

Note: HTML is not translated!
    Bad           Good