ESP32-S3 Development Board with Camera
-
RM65.00
- Product Code: ESP32-S3-CAM
- Availability: In Stock
Features:
1. ESP32-S3 is designed based on the ESP32S3module of PCB board mounted antennas.
2.The ESP32-S3 development board can be paired with two camera options: OV2640/OV5640.
3.ESP32-S3 is a low-power MCU system level chip (SoC) that integrates 2.4 GHz Wi Fi and low-power Bluetooth dual-mode wireless communication.
4. ESP32-S3 has a complete Wi Fi subsystem and a low-power Bluetooth subsystem, with industry-leading low-power and RF performance. It supports multiple low-power operating states and can meet the power consumption requirements of various application scenarios.
5.The ESP32-S3 chip provides rich peripheral interfaces and multiple unique hardware security mechanisms. The comprehensive security mechanism enables the chip to meet strict security requirements.
Parameter:
Controller: XtensaR dual core 32-bit LX7 CPU, with a frequency of up to 240MHz
Storage:
384 KB ROM
512 KB SRAM
16 KB RTCSRAM
8 MB PSRAM
Working voltage: 3V to 3.6V.
Up to 45 GPIOs
2 * 12 bit ADC (up to 20 channels)
Communication interface:
Two 12c interfaces
2 12s interface
4 SPI interfaces
3 UART interfaces
1 USB oTG interface.
Temperature range: -40 to 65 degrees Celsius
WiFi
Supports IEEE 802.11 b/g/n protocol
Supports 20 MHz and 40 MHz bandwidth in the 2.4 GHz frequency band
Supports 1T1R mode with a data rate of up to 150 Mbps
Wireless Multimedia (WMM)
Frame Aggregation (TX/RX A-MPDU, TX/RX A-MSDU)
Immediate Block ACK
Fragmentation/recombination - Beacon automatic monitoring (hardware TSF) -4 × Virtual Wi Fi interface
Simultaneously supporting Infrastructure BSS Station mode, SoftAP mode, and Station+SoftAP hybrid mode, please note that ESP32-S3 will change the SoftAP channel simultaneously when scanning in Station mode
Antenna Diversity
802.11 mc FTM
Support external power amplifier
Bluetooth
Low power Bluetooth LE: Bluetooth 5, Bluetooth mesh
High power mode (20 dBm, sharing PA with Wi Fi)
Supports speeds of 125Kbps, 500Kbps, 1 Mbps, and 2 Mbps
Advertising extensions
Multiple Advertisement Sets Channel Selection Algorithm # 2: Wi Fi and Bluetooth coexist, sharing the same antenna
peripheral interfaces and sensors
45 xGPIO port
Digital interface:
-4xSPL
-1xLCD interface (8-bit
-16 bit parallel RGB, l8080, MOTO6800), supporting mutual conversion between RGB565, YUV422, YUV420, YUV411
-1xDVP 8-bit to 16 bit camera interface
-3xUART
-2xl2C
-2x 12S
-1xRMT (TX/RX)
-1x pulse counter
-LED PWM controller with up to 8 channels
-1x full speed USB OTG
-1 x USB Serial/JTAG controller
-2x MCPWM
-1 x SDIO host interface with 2 card slots
-Universal DMA Controller (GDMA) with 5 receiving channels and 5 sending channels
-1xTWAI controller, compatible with IS011898-1 (CAN specification 2.0)
Analog interface:
-2x12 bit SAR ADC with up to 20 channels
-1x temperature sensor
-14x capacitive sensing GPIO
Timer:
-4x54 bit universal timer
-1 × 52 bit system timer
-3 × Watchdog timer
Product size: 57mm * 28mm