8 Channel Logic Level Bi-directional Converter Module TXS0108E Arduino
-
RM5.00
- Product Code: TXS0108E
- Availability: In Stock
The TXS0108E 8 channel (8-bit) bi-directional level-shifter (logic level converter) works with both open-drain and push-pull configurations. This 8-bit translator uses two separate configurable power-supply rails. The A port tracks the VA (VCCA) pin supply voltage. The VA pin accepts any supply voltage between 1.2 V and 3.6 V. The B port tracks the VB (VCCB) pin supply voltage. The VB pin accepts any supply voltage between 1.65 V and 5.5 V. When the output-enable (OE) input pin is low, all outputs are placed in the high-impedance (Hi-Z) state.
To ensure the Hi-Z state during power-up or power-down periods, tie OE to GND through a pull-down resistor.
Quick Spec:
- Chip: TXS0108E
- Channel: 8 Channel
- VCCA Terminal Support Voltage: 1.2 ~ 3.6V
- VCCB Terminal Support Voltage: 1.65 ~ 5.5V
- Maximum Transfer Speed for push-pull: 110 Mbps
- Maximum Transfer Speed for open-drain: 1.2 Mbps
- Pin Number: 20 Pin
- Dimensions: 26 x 16 x 3mm
Module pinout:
Shipping list:
- 1 x TXS0108E Level Converter - 8 Channel
- 2 x SIL Headers - 10 Way
Resources:
