Atmel ATmega8A AVR MCU Microcontroller DIP-28 PIN, 23 I/O, 6xADC, 16MHz Speed

RM12.00

Product Code: ATmega8A-PU
Availability: In Stock

QTY:

Description
Reviews (0)

The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory with read-while-write capabilities, 512B EEPROM, 1KB SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts,serial programmable USART, a byte oriented two-wire serial interface, 6-channel 10-bit A/D converter (8-channel in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator, SPI serial port, and five software selectable power saving modes. The device operates between 2.7-5.5 volts.

By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

Specifications

Category: Integrated Circuits (IC)
Family: Embedded Microcontrollers
Core processor: AVR
Series: megaAVR
Core Size: 8 - bit
Speed: 16MHz
Peripherals: Brown-out Detect / Reset, POR, PWM, WDT
Input / Output: 23
Program memory capacity: 8KB
Program memory type: FLASH
EEPROM: 512 Byte
RAM: 1024 Byte
Interface Type: I2C, SPI, USART
Communication Peripherals: 6 Analog/Digital Ports, 6 Basic Digital Ports, 6 PWM, and 1 Serial bus (Tx & Rx)
Timers: Two 8-bit / One 16-bit
Voltage - Supply (Vcc / Vdd): 2.7V ~ 5.5V
Data Converters: A/D 6 x 10b
Oscillator type: Internal
Operating temperature: -40°C ~ +85 °C
Power Consumption at 4MHz, 3V

– Active: 3.6mA

– Idle Mode: 1.0mA
Encapsulation: 28-DIP