CellMeter-7 Battery Capacity Checker (up to 7-cell) for LiPo / NiCd / NiMH / LiFe / Li-ion

Don’t risk your multirotor by flying on depleted batteries, this great little battery capacity checker puts an end to guessing how much flight time you have left in your batteries. It can be used to check the battery voltage of Lithium batteries including LiPo, LiFe, Li-Ion, as well as NiMH and NiCd batteries. For lithium types the checker will measure the voltage of both individual cells and full battery voltage, and can also indicate the highest voltage cell, lowest voltage cell and difference between, as well as display the percentage of battery capacity remaining.

Features

• High Visibility LCD Display Screen
• Battery Type: Lithium Polymer (LiPo), Lithium Iron (LiFe), Lithium Ion (Li-Ion), Nickel-Metal Hydride (NiMH) and Nickel-Cadmium (NiCd) batteries
• Cell Number: NiCd / NiMH (4 - 7 Cells), Lithium Type (2 - 7 Cells)

Specifications

• Cells: 1-7S
• Size: 84x50x16mm

Packaging list

• 1 x Battery Tester
• 1 x User Manual

How To Use

Applies to check the batteriesTesting remaining battery capacity(%).

Press the Key "TYPE" to choose LIPO, LIFE, LI-ION respectively.

The three Type can test power capacity only.

Another two Type, NiMH and Nicd, can test power voltage only.

Press the Key "CELL" to indicate the remained power.

Press the Key "MODE", Battery Voltage, Single Battery Voltage, Single Battery Max Voltage and Minimum Voltage, Single Battery Highest Voltage and Lowest Voltage will be shown.

Display Modes

• Battery cell voltages
• Total voltages
• Lowest cell voltage
• Highest cell voltage gap between highest cell voltage and lowest cell voltage
• Remaining battery capacity(%)

Note

Battery NiCd and NiMH, the checker will only display the total voltage of NiCd and NiMH batteries.

Lithium batteries the cell checker will only accept standard JST-XH balance connectors.