HF41F (Coil) GENERAL RELAY- 6A SPST 4-Pin

Solid State Relay can switch 6-A loads and has a space-saving design, ideal for high density PCB applications. Can switch up to 240VAC at 6A currrent level. These devices are optoisolated for the protection of control circuitry.

Specifications

• Poles & Throw: Single Pole Single Throw
• Working voltage: Optional 5 – 24VDC
  • 5VDC (HF41F-05-HS)
  • 12VDC (HF41F-12-HS)
  • 24VDC (HF41F-24-HS)
• Max Switching Current: 6A
• Max Switching Voltage: 250VAC / 30VDC
• Coil Power: 170mW
• Coil Resistance: 848Ω
• Coil Type: Non-Latching
• Contact Material: AgNi
• Dimensions: 28 x 5 x 15 mm (LxWxH)

Package Content

1 x HongFa HF GENERAL RELAY

Relay Pin Terminals

Another step for connecting a relay to the PCB covers the pin terminals and configuration of the relay. The standardized approach shown in the table identifies the terminals of electromagnetic relays.

Terminal	Terminal Description
_COIL	One end of the coil – voltage connects to the terminal to supply power to the coil
COIL	One end of the coil – voltage connects to the terminal to supply power to the coil
COM	This is the output terminal of the relay where one end of the load circuit is connected. This terminal is internally connected with either of the other two terminals depending on the state of the relay.
NO – Normally Open	Connects to device that the relay will power when the coil receives sufficient voltage to energize.  Device remains off when the relay has no power and switches on when the relay receives power.