NodeMCU V2 - ESP8266 WiFi, CP2102, 4MB Storage - Development Board

The NodeMcu is an open-source firmware and development platform that helps you to prototype your IOT product with just a few lines of Lua script. The Arduino-like hardware IO with advanced API will dramatically reduce the redundant work for configuring and manipulating hardware. Basically you can code like Arduino, but interactively in Lua Script.

Arduino-like hardware IO
Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
Code like arduino, but interactively in Lua script.
 
Nodejs style network API
Event-driven API for network applicaitons, which faciliates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
Greatly speed up your IOT application developing process.
 
Lowest cost WI-FI
On-board ESP8266, a low-cost WiFi-MCU Module integrated and easy to prototyping development board. The best platform for IOT application development at the lowest cost.
The Development board based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your development in the fastest way combining with NodeMCU Firmware!

Features

• Open-source platform
• Interactive & Programmable
• WiFi enabled
• Arduino-like Hardware IO
• Nodejs style network API
• ESP8266, a low cost WiFi module on-board (FCC Certified)
• On-board USB-TTL converter, plug & play
• Headers – 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins

Specifications

• Input Voltage: 7 – 12V
• Operating Voltage: 3.3V
• CPU: 32-bit RISC Tensilica Xtensa LX106 running at 80 MHz
• 64 KB of instruction RAM, 96 KB of data RAM   (80x Arduino UNO!)
• 512 KB of EEPROM (512x Arduino UNO!)
• External QSPI flash – 512 KB to 4 MB* (up to 16 MB is supported)
• IEEE 802.11 b/g/n Wi-Fi
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • WEP or WPA/WPA2 authentication, or open networks
• Digital I/O Pins (DIO): 16
• Analog Input Pins (ADC): 1
• UARTs: 1 on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
• SPIs: 1
• I2Cs: 1
• Flash Memory: 4 MB
• SRAM: 64 KB
• Clock Speed: 80 Mhz
• 80 Mhz clock (5x arduino UNO or mega!)
• Current: 215mA
• Dimensions: 49 x 24.5 x 13mm

NodeMCU DEVKIT 1.0

Developer	ESP8266 Opensource Community
Type	Single-board microcontroller
Operating system	XTOS
CPU	ESP8266 (LX106)
Memory	128kBytes
Storage	4MBytes
Power	USB

Documentation

You can find the firmware source code and documentation on Github, as well as nodemcu-flasher, a Windows only tools to flash the firmware to a module. There’s also a separate tool called esptool that will let you flash nodemcu from Linux. In case you find the documentation is all over the place, you might want to checkout NodeMCU video tutorial below.

Wiki & External links

• CP210x USB to UART Bridge VCP Drivers
• Nodemcu.com is the official website for the project, but you’ll find more information on Github. You can also get answers to your questions on their BBS or ESP8622 community forums.