USBASP / USBISP 3.3V / 5V - Programmer for AVR ATMEL S51

This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegant. The USB interface is achieved by using an Atmega processor and the rest is done in firmware. For those interested, the firmware source code can be downloaded from the USBasp website.

Features

• Supports S51 and the AVR chips
• Fast and stable Standard IDC 10PIN interface
• On-board ATMega8 (L)
• With power and programming indicator light
• On-board overcurrent protection, 20 ohm isolation resistors and resettable fuse for short-circuit prevention
• Support 5V and 3.3V power supply

Supported microcontrollers

These programmers are a perfect companion to the Protostack 28 pin AVR Development Board or the Protostack ATMEGA8 Development Kit.

• ATMega Series

ATmega8 ATmega48 ATmega88 ATmega168 ATmega328

ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega16

ATmega161 ATmega162 ATmega163 ATmega164 ATmega169

ATmega2560 ATmega2561 ATmega32 ATmega324 ATmega329

ATmega3290 ATmega64 ATmega640 ATmega644 ATmega649

ATmega6490 ATmega8515 ATmega8535

• ATTiny Series

ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26

ATtiny45 ATtiny85 ATtiny2313

• Classic Series

AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414

AT90S4433 AT90S4434 AT90S8515

AT90S8535 

• CAN Series

AT90CAN128 

• PWM Series

AT90PWM2 AT90PWM3

Packages

• 1 x Black USBASP
• 1 x 10 pin cable