MY2N-J Relay - 5A, DPDT 8-Pin w/ Plug-in Terminals

0 reviews / Write a review

RM8.00

Product Code: MY2N-J
Availability: In Stock

Available Options

Voltage

QTY:

Add to Wish List

Compare this Product

Description
Reviews (0)

Features

Plug-in Terminals, easy to exchange while mount on relay base
Built-in operation indicators LED

Specifications

Poles & Throw: Double Pole Double Throw
Coil voltage: Optional
Max Switching Current:
- 5 A at 220 VAC
- 5 A at 24 VDC
Max Switching Voltage: 250 VAC, 125 VDC
Coil Resistance: 100 mΩ at 6 VDC
Coil power: 60VA / 24W
Contact:
- Contact materials: Ag
- Contact resistance: 50 mΩ max.
- Operation time: 20 ms max.
- Release time: 20 ms max.
- Maximum operating frequency: Mechanical - 18,000 operations/h
- Insulation resistance: 100 MΩ min.
Ambient operating temperature: -55 to 60°C*2
Ambient operating humidity: 5% to 85%
Environmental friendly product (RoHS compliant)

Operating Coils

Item Rated voltage (V)		Rated current (mA)		Coil resistance (Ω)	Coil inductance (H)		Must- operate voltage (V)	Must- release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
		50 Hz	60 Hz		Armature OFF	Armature ON
AC	12	106.5	91	46	0.17	0.33	80% max. ^*¹	30% min. ^*²	110% of rated voltage	Approx. 1.0 to 1.2 (at 60 Hz)
	24	53.8	46	180	0.69	1.3
	100/110	11.7/12.9	10/11	3,750	14.54	24.6				Approx. 0.9 to 1.1 (at 60 Hz)
	110/120	9.9/10.8	8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8	5.3/5.8	12,950	54.75	94.07
	220/240	4.8/5.3	4.2/4.6	18,790	83.5	136.4
DC	12	72.7		165	0.73	1.37		10% min. ^*²		Approx. 0.9
	24	36.3		662	3.2	5.72
	48	17.6		2,725	10.6	21.0
	100/110	8.7/9.6		11,440	45.6	86.2

Package Content

1 x MY2N-J Relay

Relay Pin Terminals

Another step for connecting a relay to the PCB covers the pin terminals and configuration of the relay. The standardized approach shown in the table identifies the terminals of electromagnetic relays.

Terminal

Terminal Description

_COIL

One end of the coil – voltage connects to the terminal to supply power to the coil

COIL

One end of the coil – voltage connects to the terminal to supply power to the coil

COM
This is the output terminal of the relay where one end of the load circuit is connected.

This terminal is internally connected with either of the other two terminals depending on the state of the relay.

NO – Normally Open

Connects to device that the relay will power when the coil receives sufficient voltage to energize. Device remains off when the relay has no power and switches on when the relay receives power.

NC – Normally Closed

Terminal connects to device to power when relay receives no power. Device remains on when the relay has no power and switches off when the relay receives power.

Terminal	Terminal Description
_COIL	One end of the coil – voltage connects to the terminal to supply power to the coil
COIL	One end of the coil – voltage connects to the terminal to supply power to the coil
COM	This is the output terminal of the relay where one end of the load circuit is connected. This terminal is internally connected with either of the other two terminals depending on the state of the relay.
NO – Normally Open	Connects to device that the relay will power when the coil receives sufficient voltage to energize. Device remains off when the relay has no power and switches on when the relay receives power.
NC – Normally Closed	Terminal connects to device to power when relay receives no power. Device remains on when the relay has no power and switches off when the relay receives power.