Infrared Thermometer Non-contact Module GY-906-BCC (Detect-Range 10CM) - MLX90614

This is a MLX90614ESF-BCC non-contact infrared thermometer for use with Arduino, or any microcontroller that can communicate with it through it's I2C interface.

Applications

• High precision non-contact temperature measurements
• Thermal comfort sensor for mobile air conditioning control system
• Temperature sensing element for residential,
• Commercial and industrial building air conditioning
• Windshield defogging
• Automotive blind angle detection
• Industrial temperature control of moving parts
• Temperature control in printers and copiers
• Home appliances with temperature control
• Healthcare
• Livestock monitoring
• Movement detection
• Thermal alert

Features

• Small size, low cost
• Mounted on a breakout board with two types of pins
• 10k Pull up resistors for the I2C interface with optional solder jumpers
• Easy to integrate
• Detect Range: 4 – 10CM
• Field of view: 35 degrees
• Power supply: 3 – 5V DC
• Communication: standard IIC communication protocol, 0x5A is the fixed 7-bit address
• Factory calibrated in wide temperature range:
  • -40°C to +125°C for sensor temperature
  • -70°C to +380°C for object temperature
• High accuracy of 0.5°C over wide temperature range (0°C to +50°C for both Ta and To)
• Measurement resolution of 0.02°C

Package Included

1 x  MLX90614ESF-BAA-000-TU-ND Infrared Thermometer Module IR Sensor for Arduino

#include <Wire.h>
#include <Adafruit_MLX90614.h>

Adafruit_MLX90614 mlx = Adafruit_MLX90614();

void setup() {
  Serial.begin(9600);
  Serial.println("Adafruit MLX90614 test");  
  mlx.begin();  
}

void loop() {
  Serial.print("Ambient = "); Serial.print(mlx.readAmbientTempC()); 
  Serial.print("*C\tObject = "); Serial.print(mlx.readObjectTempC()); Serial.println("*C");
  Serial.print("Ambient = "); Serial.print(mlx.readAmbientTempF()); 
  Serial.print("*F\tObject = "); Serial.print(mlx.readObjectTempF()); Serial.println("*F");

  Serial.println();
  delay(500);
}

The result will display in serial monitor.