Tower Pro MG90S Micro Servo Motor, max 2.2KG per cm w/ Metal Gear

The MG90S is an upgrade of the SG90. Better outputs with more torque and speed than the SG90 and also has metal gears, thus no stripping in crashes! MG90S digital servo is the most popular 9g metal servo in the world. Great reputation for reliability and inexpensive price. Can't beat it for the money.

A micro servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, it is not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino or by just wiring up with the Servo library. Comes with a few horns and hardware.

To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE. Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.

• Light weight high strength nylon casing
• Durable metal gear design
• Recommended for 200 - 450 size helicopters or light weight aircraft
• Different servo horn included for different application 

Specification:

• Operating speed (4.8V no load) : 0.10sec / 60 degrees
• Operating speed (6.0V no load) : 0.08sec / 60 degrees
• Stall torque : 1.8kg/cm @ 4.8V; 2.2kg/cm @ 6.0V 
• Operating voltage : 4.8 - 6.0V
• Temperature range : -30 C ~ 60 C
• Dead band width : 2us

The wire colors are:

• Red = Battery(+) 
• Brown = Battery(-) 
• Orange = Signal

Package Included:
1 x Tower Pro MG90S 9G Micro Servo with Accessories