Current Signal to Voltage - Converter Module (4 - 20mA) to (0 - 10V)

Features

• Power Supply Voltage: 7 – 36VDC  (if the output needs to be 10V, the input must be over 12V)
• After power on, the D2 indicator should be on. Otherwise, please check the wiring.
• The product has reverse polarity protection.
• When the current input is at minimum (0mA or 4mA), adjust the Zero potentiometer to make the voltage output to be the minimum value (0.0V or others).
• When the current input is at maximum (20mA), adjust the Span potentiometer to make the voltage output to be the maximum value (3.3V or 5V or 10V; the output can be as low as 2.5V when the current input is within 4 -20mA).

Adjustment Range

According to your needs, select the appropriate span through the jumper cap:
ON: jumper cap buckles on the two jumper pins
OFF: two jumper pins without the jumper cap

Input 4-20mA

• Outpu 0 – 2.5V range:   pin 1, 2 ON    pin 3, 4 ON
• Outpu 0 – 3.3V range:   pin 1, 2 OFF   pin 3, 4 OFF
• Outpu 0 – 5.0V range:   pin 1, 2 ON    pin 3, 4 ON
• Outpu 0 – 10.0V range:  pin 1, 2 ON    pin 3, 4 OFF

Input 0-20mA

• Outpu 0 – 3.3V range:   pin 1, 2 ON    pin 3, 4 ON
• Outpu 0 – 5.0V range:   pin 1, 2 ON    pin 3, 4 ON
• Outpu 0 – 10.0V range:  pin 1, 2 ON    pin 3, 4 OFF

Product included

1 x Signal Current to Voltage Converter Module