Wireless 4 Channel RF 315 / 433MHz Remote Receiver DC12V (Momentary, Latching, Toggle) w/ Relay

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with DC12V.

Features

• Selectable in momentary, latching, and interlock mode

Wireless Receiver Controller

• Frequency (Options) : 315MHZ ±150kHz(max) / 433MHZ ±150kHz(max)
• Operating voltage: DC12V
• Operating Current: ≤7mA
• Operating temperature: -40℃~+80(℃)
• Receiving sensitivity: ≥-105dBm
• Receiving distance: 200m (100-200m to the max for open spaces)

SELECT OPERATING MODE

Press down button until LED turn on and continue to hold, 3 seconds later the LED will turn off  but don’t release yet, continue to hold.

• LED will flash once. Release button now for momentary mode, or continue to hold.
• LED will flash twice. Release button now for latching mode, or continue to hold.
• LED will flash three times. Release button for toggle mode.

 

PROGRAM MODE IN

Hold down button until LED lights and release button while lit. LED will stay on. Press any key on remote. LED will flash two times confirming successful. Now press remote keys and relays will function as programmed. Note: LED will flash rapidly when not programming and any key is pressed.

• Momentary = Single relay will stay on only as long as the certain remote button is pressed.
• Latching = Press any remote button for on, press same key again for off, each relay independently on/off.
• Toggle= Only one relay will on; press another button for on another relay and pervious relay will turn off.

Terminal Block Pin Out

• Rly A .B .C .D
• NC 4 10 .1 .7
• Cm 5 11 .2 .8
• NO 6 12 .3 .9

Package Included:
1 x Receiver with housing