• Wireless 12 Channel RF Remote Set (12VDC) w/ Relay

Wireless 12 Channel RF Remote Set (12VDC) w/ Relay

  • RM110.00

  • Product Code: Wireless Controller Board 12CH DC12
  • Availability: In Stock

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with DC12V.


Wireless Receiver Controller

  • Channel: 12 Channel
  • Operating voltage: DC12V
  • Frequency: 315Mhz
  • Operating temperature: -40℃ ~ +80(℃)
  • Receiving sensitivity: ≥-105dBm
  • Case Dimension: 74 x 53 x 30mm
  • Receiving distance: 100 – 200m (200m max for open space)



Press the button on receiver board until LED blink once then release.

  • Press remote button 1 button now for latching mode
  • Press remote button 2 button once for momentary mode
  • Press remote button 3 button for interlock mode
  • Press remote button 4 button for semi latching (1 ~ 6) & semi momentary (7 ~ 12) mode
  • Press remote button 5 button for semi latching (1) & semi momentary (2 ~ 12) mode

Long press button on receiver board around 8 second (Long beep from buzzer) will clear the receiver board memory; After this will require to pair with any remote again, maximum can pair up-to 30 remote control.



  • Momentary = Single relay will stay on only as long as the certain remote button is pressed.
  • Latching = Press any remote button for on, press same key again for off, each relay independently on/off.
  • Interlock = Only one relay will on; press another button for on another relay and pervious relay will turn off.

Package Included

  • 1 x Receiver
  • 1 x Transmitter




Write a review

Note: HTML is not translated!
    Bad           Good


Related Products

Tags: Wireless, Relay, Remote Control